Farallon-communications NetopiaTM Bedienungsanleitung PDF herunterladen (Seite 60)

60 Appendix B

AT!E5=n V.120 N200 (Maximum Retry Count)

AT!E6=n V.120 T203 (Link Integrity Timer)

AT!E7=n V.120 Idle Timer

AT!N1=n * ISDN Primary Directory Number

AT!N11=n * ISDN Alternate Directory Number

AT!N2=n Primary Directory Number #2 (for Multilink PPP)

AT!N21=n Secondary Directory Number #2 (for Multilink PPP)

AT!N3=n * ISDN Primary Subaddress

AT!N31=n * ISDN Alternate Subaddress

AT!N4=n Primary Subaddress #2 (for Multilink PPP)

AT!N41=n Secondary Subaddress #2 (for Multilink PPP)

AT%A2=n * Rate Adaption Control

AT%A95=c Incoming Data Call Answer

AT%M1=n Local Endpoint Identiﬁer Class

AT%M2=n Remote Endpoint Identiﬁer Class

AT%M3=n Local Endpoint Identiﬁer Value

AT%M4=n Remote Endpoint Identiﬁer Value

AT%MT1=v PPP Turbo Mode Command. A setting of 0 disables turbo mode, while a setting of

128000-512000 sets the turbo bitrate value. The default setting is 512000.

AT%MT2=v PPP Turbo Mode Command. A setting between 57600 and 115200 that speciﬁes the

minimum PC bitrate threshold for the activation of turbo mode. The default is 57600.

AT&Cn Data Carrier Detect

AT&Dn Data Terminal Ready

AT&F Load Limited Factory Proﬁle; Replaces all settings in current proﬁle with default factory

values except for ISDN Switch Type, SPID numbers, local ISDN Numbers, Subaddresses,

Rate Adaption Protocols, Outgoing ISDN Numbers, Multilink PPP Parameters

AT&Kn Flow Control

AT&Sn Data Set Ready

AT&V View Current and Stored Proﬁle

AT&Wn Save Current to Stored Proﬁle

AT&Yn Designate Stored Proﬁle n as the Powerup Proﬁle

AT&Zn=v Store Telephone Number(s)

AT@MENU Activate VT100 Conﬁguration Tool

AT>F Restores All Proﬁles to Factory Settings

AT>FC Replaces all Settings in the Current Proﬁle with Default Factory Values

AT>H Display a List of All Commands with Descriptions

AT Command Description

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66

Keine Kommentare

Farallon-communications NetopiaTM Bedienungsanleitung Seite 60